Pristupačnost
Experimental investigation and modeling of power losses in the bread loaf surface permanent magnet synchronous machine
Revised Correction Factors in the Specht's Model for Calculation of the Transformer Inrush Current
Test methods for validating inductive transformer performance during cable discharge: Main principles, parameters and testing procedures
Test Methods for Validating Instrument Transformer Performance During Line Discharge
Condition-Monitoring System for Identification and Representation of the Capability Diagram Limits for Multiple Synchronous Generators in a Hydro Power-Plant
A novel concept for micro hydropower plants based on synchronous reluctance generators
Conducting measurements and implementation of interactive P-Q capability diagram for the Vinodol hydropower plant generators
Reduction of computational efforts in finite element based permanent magnet traction motor optimization
On-Load Analysis of Saturated Surface Permanent Magnet Machines Using Conformal Mapping and Magnetic Equivalent Circuits
Vibracije glava namota - Izvještaj za razdoblje od 22.9.2017. do 9.4.2018.
Modelling of Cross Saturation Effect in Interior Permanent Magnet Synchronous Machines Using Magnetic Equivalent Circuits
Mobile box for battery charging in electric vehicle
PRORAČUN STACIONARNIH STANJA SINKRONIH STROJEVA PRIMJENOM STRUJNO OVISNIH FUNKCIJA ULANČANIH TOKOVA
Monitoring system of synchronous generator in TPP Plomin2 (upgrade during refurbishment 2017.)
Proračun stacionarnih stanja sinkronih strojeva primjenom strujno ovisnih funkcija ulančanih tokova
Terms of use of a mobile box for charging batteries in an electric car
Centrifugal fan design for permanent magnet synchronous motor in a traction application
No-Load Analysis of Permanent Magnet Machines With Bread-Loaf Magnets and Fractional-Slot Winding Using Conformal Mapping and Magnetic Equivalent Circuits
3D finite element analysis of traction transformer for EMU-250
3D finite element analysis of magnetic stress in the end region of a turbogenerator
Approach to Ship Power Network Optimization Regarding Total Harmonic Distortion
A Novel Method for No-Load Magnetic Field Analysis of Saturated Surface Permanent-Magnet Machines Using Conformal Mapping and Magnetic Equivalent Circuits
End Winding Vibration Measurement - Report for the period from September 2011 to May 2015
Small Signal Calculation of Common Mode Choke Characteristics Using Finite Element Method
Calculation of No-Load Saturation Curve for Wound Field Synchronous Machines Based on Magnetic Equivalent Circuits and Conformal Mapping
Application for display of synchronous generator P-Q diagram with variable limits
LabVIEW Application for Visualisation of Synchronous Machine Real-Time Capability Diagram with Variable Operational Limits
Visualisation of the synchronus generator capability diagram with variable operation using LabVIEW
Approach to ship power network optimization regarding total harmonic distortion
Analysis of Power Grid for a Multipurpose Vessel – Yard 507
Computationally Efficient Finite-Element-Based Methods for the Calculation of Symmetrical Steady-State Load Conditions for Synchronous Generators
Influence of winding design on thermal dynamics of permanent magnet traction motor
Mjerenje vibracija glava namota - Izvještaj 3
User P-Q Diagram as a Part of a Synchronous Generator Monitoring System
MONITORING SYSTEM FOR INDUCTION MACHINES ON THE MARINE VESSEL
End Winding Vibration Measurement - Report No. 1
End Winding Vibration Measurement - Report No. 2
Steady-State Synchronous Machine Model which Incorporates Saturation and Cross-Magnetization Effects
Synchronous Generator Monitoring System as a Tool for Power Grid Diagnostics
Synchronous generator monitoring system as a diagnostics basis for other power system components
Measurement of Excitation Winding Temperature on Synchronous Generator in Rotation Using Infrared Thermography
Lead acid battery usage conditions
Calculation of force between permanent magnets using finite element method
Measuring the energy consumption of the elevator drive engine
Design of Large Synchronous Turbo-Generator Monitoring System
Design of the Monitoring System for a Synchronous Generators in Hydro Power Plant
Analytical Wideband Model of a Common Mode Choke
Stochastic Modeling of Total Ground Irradiance of Horizontal Surface
Influence of different adhesive technologies on the accuracy of temperature probes
Proračun totalnog harmoničkog izobličenja u elektroenergetskoj mreži jaružara 496
Problems Related to Excitation Winding Surface Temperature Measurement of a Salient Pole Synchronous Generator in Rotation
Influence of Temperature Probes Installation on the Salient Pole to Temperature Measurement
Synchronous aggregate moment of inertia estimation by multiple shutdown tests under different conditions
Development of monitoring system of synchronous generator in TPP Plomin2
A New Method for Estimation of Synchronous Machine Moment of Inertia
Projekt računalne i elektroenergetske mreže C zgrade Fakulteta elektrotehnike i računarstva
Application of IR Thermography to Measurements on Synchronous Hydro-generator in Rotation
Some problems related to surface temperature measurement of synchronous generator excitation winding in rotation
The Analysis of the Infrared Excitation Winding Surface Temperature Measurement on a Synchronous Hydro-generator in Rotation
Influence of Mounting Temperature Probes on the Excitation Winding on its Temperature Field
Common Mode Choke Modelling
Stochastic model of total ground irradiance signal of horizontal surface
Monte Carlo metoda primijenjena u simulaciji ozračenja solarnih ćelija
Teaching
University undergraduate
- Final BSc Project (Lecturers)
- Final BSc Thesis (Lecturers)
- Project C (Lecturers)
- Project E (Lecturers)
- Electromechanical Energy Conversion (Laboratory exercises)
- Electromechanical Energy Conversion (Laboratory exercises)
University graduate
- Engineering Mechanics (Lecturer in charge)
- Engineering Mechanics (Lecturer in charge)
- Generators and Transformers (Lecturer in charge)
- Generators and Transformers (Lecturer in charge)
- Industrial System Dynamics (Lecturer in charge)
- Laboratory of Electrical Engineering Systems and Technology 2 (Lecturer in charge)
- Switching and Protection Devices (Lecturer in charge)
- Switching and Protection Devices (Lecturer in charge)
- Testing and Diagnostics of Electric Machines (Lecturer in charge)
- Testing and Diagnostics of Electric Machines (Lecturer in charge)
- Design of Electrical Machines and Transformers (Lecturers, Laboratory exercises)
- Electric Drives (Lecturers)
- Graduation Thesis (Lecturers)
- Master Project (Lecturers)
- Mentorship Seminar (Lecturers)
- Presentation Seminar (Lecturers)
- Project (Lecturers)
- Synchronous and Induction Machines (Lecturers, Laboratory exercises)
- Laboratory of Electrical Engineering Systems and Technology 1 (Laboratory exercises)
Postgraduate doctoral study programme
- Automated testing of electrical machines (Lecturer in charge)
- Transformers (Lecturer in charge)
Competences
-
Magnetics
Magnetic analysis Magnetic devices Magnetic fields Magnets -
Mathematics
Conformal mapping Finite element analysis Optimization -
Circuits and systems
Magnetic circuits -
Industry applications
Electromechanical devices Electric machines AC machines Brushless machines DC machines Generators Permanent magnet machines Rotating machines Motors AC motors Brushless motors DC motors Induction motors Permanent magnet motors -
Power engineering and energy
Turbogenerators Transformers