doc. dr. sc. Vinko Lešić

Assistant professor, Department of Control and Computer Engineering

Function: Assistant Professor, Department of Control and Computer Engineering

Location:
Public phone number:
6129-785
Internal phone number:
285

Cascaded control of back-to-back converter DC link voltage robust to grid parameters variation

Car, Mateja ; Lešić, Vinko ; Vašak, Mario
2020.
IEEE transactions on industrial electronics

Identification of a control-oriented energy model for a system of fan coil units

Martinčević, Anita ; Vašak, Mario ; Lešić, Vinko
2019.
Control engineering practice

Hierarchical Model Predictive Control for Coordinated Electric Railway Traction System Energy Management

Novak, Hrvoje ; Lešić, Vinko ; Vašak, Mario
2019.
Ieee transactions on intelligent transportation systems

Control in Smart Cities

Stamatescu, Grigore ; Lešić, Vinko
2018.
26th Mediterranean Conference on Control and Automation

Price-Optimal Energy Flow Control of a Building Microgrid Connected to a Smart Grid

Marušić, Danko ; Lešić, Vinko ; Capuder, Tomislav ; Vašak, Mario
2018.
2018 26th Mediterranean Conference on Control and Automation (MED)

Distributed Optimal Batteries Charging Control for Heterogenous Electric Vehicles Fleet

Bucić, Petra ; Lešić, Vinko ; Vašak, Mario
2018.
26th Mediterranean Conference on Control and Automation

Upgrade of a typical office building automation system for enabling open energy management services

Vašak, Mario ; Starčić, Antonio ; Lešić, Vinko ; Martinčević, Anita
2017.
International Conference on Smart Systems and Technologies 2017

Hierarchical Coordination of Trains and Traction Substation Storages for Energy Cost Optimization

Novak, Hrvoje ; Lešić, Vinko ; Vašak, Mario
2017.
2017 IEEE 20th International Conference on Intelligent Transportation Systems (ITSC)

DC link voltage control of back-to-back converter robust to grid conditions

Car, Mateja ; Lešić, Vinko ; Vašak, Mario
2017.
International Conference on electrical drives and power electronics

Control of a buck-boost DC-DC power converter for microgrid energy storage

Car, Mateja ; Vašak, Mario ; Lešić, Vinko
2017.
International Conference on electrical drives and power electronics

Comfort Control in Buildings with Adherence to the Required Thermal Energy Input in Zones

Martinčević, Anita ; Rukavina, Filip ; Lešić, Vinko ; Vašak, Mario
2017.
IEEE International Symposium on Industrial Electronics

Nonlinear hierarchical building zone and microgrid control based on sensitivity analysis

Lešić, Vinko ; Vašak, Mario ; Martinčević, Anita ; Novak, Hrvoje
2017.
21st International Conference on Process Control

Modular energy cost optimization for buildings with integrated microgrid

Lešić, Vinko ; Martinčević, Anita ; Vašak, Mario
2017.
Applied energy

Predictive control for heating power variance and peak reduction in buildings

Starčić, Antonio ; Lešić, Vinko ; Vašak, Mario
2016.
The 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON 2016)

Process automatization seminar materials for industry participants - advanced level

Hadjina, Tamara ; Hure, Nikola ; Lešić, Vinko ; Marković, Ivan ; Vašak, Mario ; Petrović, Ivan
2016.

Process automatization seminar materials for industry participants - basic level

Hadjina, Tamara ; Hure, Nikola ; Lešić, Vinko ; Marković, Ivan ; Vašak, Mario ; Petrović, Ivan
2016.

Multi-level Optimal Control of a Microgrid- supplied Cooling System in a Building

Gulin, Marko ; Martinčević, Anita ; Lešić, Vinko ; Vašak, Mario
2016.
IEEE PES Innovative Smart Grid Technologies Conference Europe, ISGT Europe 2016

Hierarchical Energy Management of Multi-Train Railway Transport System with Energy Storages

Novak, Hrvoje ; Vašak, Mario ; Lešić, Vinko
2016.
2016 IEEE International Conference on Intelligent Rail Transportation

Model Predictive Control for Energy-saving and Comfortable Temperature Control in Buildings

Martinčević, Anita ; Vašak, Mario ; Lešić, Vinko
2016.
Mediterranean Conference on Control and Automation

Computer-assisted Management of Building Climate and Microgrid with Model Predictive Control

Lešić, Vinko ; Vašak, Mario ; Martinčević, Anita ; Gulin, Marko ; Starčić, Antonio ; Novak, Hrvoje
2015.

State of the art control methods for energy efficient train operation in a railway traffic system

Novak, Hrvoje ; Vašak, Mario ; Lešić, Vinko
2015.
35th Conference on Transportation Systems with International Participation Automation in Transportation 2015

Railway transport system energy flow optimization with integrated microgrid

Novak, Hrvoje ; Vašak, Mario ; Gulin, Marko ; Lešić, Vinko ;
2015.
12th International Conference on Modern Electrified Transport, MET 2015

Computer-assisted Management of Building Climate and Microgrid with Model Predictive Control

Lešić, Vinko ; Vašak, Mario ; Martinčević, Anita ; Gulin, Marko ; Starčić, Antonio ; Novak, Hrvoje
2015.
17th International Conference on Civil and Building Engineering, ICCBE 2015

Increasing Accuracy of Kalman Filter-based Sensorless Control of Wind Turbine PM Synchronous Generator

Lončarek, Tomislav ; Lešić, Vinko ; Vašak, Mario
2015.
International Conference on Industrial Technology, ICIT 2015

Control of 3D Tower Crane based on Tensor Product Transformation with Neural Friction Compensation

Matuško, Jadranko ; Ileš, Šandor ; Kolonić, Fetah ; Lešić, Vinko
2015.
Asian journal of control

Generator-fault-tolerant Control for a Variable-speed Variable-pitch Wind Turbine

Vašak, Mario ; Lešić, Vinko ; Wolbank, Thomas ; Perić, Nedjeljko
2015.

Fault-tolerant Control of a Wind Turbine subject to Generator Electromechanical Faults

Lešić, Vinko
2014.

Control of Induction Machine based on Mathematical Model with Included Anisotropy

Lešić, Vinko ; Vašak, Mario ; Stojčić, Goran ; Wolbank, Thomas M.
2014.
International Power Electronics and Motion Control Conference and Exposition, PEMC

Fault-tolerant Control of Wound Rotor Synchronous Generator in Wind Turbines

Lešić, Vinko ; Vašak, Mario ; Stojčić, Goran ; Wolbank, Thomas M.
2014.
International Conference on Electrical Machines, ICEM

Influence of Wind Turbine Generator Fault-tolerant Control on Power Production Quality

Lešić, Vinko ; Vašak, Mario ; Perić, Nedjeljko ; Jakopović, Željko ; Joksimović, Gojko ; Wolbank, Thomas M.
2014.
7th IET international conference on Power Electronics, Machines and Drives, PEMD

Fault-tolerant Control of Permanent Magnet Synchronous Generator in Wind Turbines

Lešić, Vinko ; Vašak, Mario ; Stojčić, Goran ; Wolbank, Thomas M.
2014.
European Wind Energy Association 2014 Annual Event, EWEA 2014

Optimal Flux Magnitude Tracking with Application to Fault-tolerant Control of Wind Turbine Generators

Lešić, Vinko ; Vašak, Mario ; Perić, Nedjeljko ; Joksimović, Gojko ; Wolbank, Thomas M.
2013.
European Control Conference 2013 (ECC 2013)

Fault-tolerant Control of a Wind Turbine with a Squirrel-cage Induction Generator and Rotor Bar Defects

Lešić, Vinko ; Vašak, Mario ; Perić, Nedjeljko ; Wolbank, Thomas ; Joksimović, Gojko
2013.
Automatika

Fault-tolerant Control of a Wind Turbine with Generator Stator Inter-turn Faults

Lešić, Vinko ; Vašak, Mario ; Perić, Nedjeljko ; Joksimović, Gojko ; Wolbank, Thomas
2013.
Automatika

Dynamic Induction Machine Model Accounting for Stator and Rotor Slotting

Joksimović, Gojko ; Riger, Jakša ; Wolbank, Thomas M. ; Perić, Nedjeljko ; Vašak, Mario ; Stojčić, Goran ; Lešić, Vinko
2012.
XXth International Conference on Electrical Machines, ICEM

Field-oriented Control of an Induction Machine with Winding Asymmetries

Lešić, Vinko ; Vašak, Mario ; Gulin, Marko ; Perić, Nedjeljko ; Joksimović, Gojko ; Wolbank, Thomas
2012.
15th International Power Electronics and Motion Control Conference, EPE-PEMC 2012 ECCE Europe

State and Parameter Estimation for Field-oriented Control of Induction Machine Based on Unscented Kalman Filter

Lešić, Vinko ; Vašak, Mario ; Stojičić, Goran ; Perić, Nedjeljko ; Joksimović, Gojko ; Wolbank, Thomas
2012.
2012 International Symposium on Power Electronics, Electrical Drives, Automation and Motion

Fault-tolerant Control of a Wind Turbine with a Squirrel-cage Induction Generator and Stator Inter-turn Faults

Lešić, Vinko ; Vašak, Mario ; Perić, Nedjeljko ; Joksimović, Gojko ; Wolbank, Thomas
2012.
The 12th International Workshop on Advanced Motion Control

Fault-tolerant Control of a Wind Turbine with a Squirrel-cage Induction Generator and Rotor Bar Defects

Lešić, Vinko ; Vašak, Mario ; Perić, Nedjeljko ; Wolbank, Thomas ; Joksimović, Gojko
2011.
17th International Conference on Electrical Drives and Power Electronics (5th Joint Slovak-Croatian Conference)

Tensor Product Based Control of the Single Pendulum Gantry Process with Stable Neural Network Based Friction Compensation

Matuško, Jadranko ; Lešić, Vinko ; Kolonić, Fetah ; Ileš, Šandor
2011.
2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM2011)

Fault-Tolerant Control of a Blade-pitch Wind Turbine With Inverter-fed Generator

Lešić, Vinko ; Vašak, Mario ; Perić, Nedjeljko ; Wolbank, Thomas ; Joksimović, Gojko
2011.
2011 IEEE International Symposium on Industrial Electronics

Neural Network-based Friction Compensation for Gantry Crane Control System

Lešić, Vinko
2010.

B-spline neural compensator for system's nonlinearities

Boras, Marija ; Lešić, Vinko ; Matuško, Jadranko ; Kolonić, Fetah
2010.
33rd International Convention on Information and Communication Technology, Electronics and Microelectronics

Teaching duties

University undergraduate

University graduate

Competences

  • Control systems
    Automatic control Power generation control Closed loop systems Control engineering Control system synthesis Fault tolerant control Linear feedback control systems Torque control Nonlinear control systems Optimal control SCADA systems
  • Mathematics
    Linear programming Convex functions Estimation Linear systems Mathematical model Optimization
  • Computers and information processing
    Control engineering computing
  • Industrial electronics
    Machine vector control
  • Industry applications
    Renewable energy sources AC machines Generators Permanent magnet machines
  • Power electronics
    AC-AC converters DC-AC power converters
  • Power engineering and energy
    Energy management Energy efficiency Wind energy Wind energy generation
  • Robotics and automation
    Building automation

Personal data

Graduation year:
2010.
PhD graduation year:
2014.
Employed in this institution since:
2010.