Pristupačnost
Deep Learning Based Speech Enhancement on Edge Devices Applied to Assistive Work Equipment
Instrumentation and Measurement Systems: Ecosystems—Insights from NDT and Eddy Current Testing
Rapid Object Depth Estimation From Position- Referenced EMI Data Using Machine Learning
Inversion-Based Magnetic Polarizability Tensor Measurement From Time-Domain EMI Data
Landmine Identification From Pulse Induction Metal Detector Data Using Machine Learning
Energy Autonomous Wake-Up Detectors
Low-Power Level-Crossing Rate-Based Diver Detection System
Object Depth Estimation From Line-Scan EMI Data Using Machine Learning
Field-experiences of tracking plant’s xylem embolism formation with embedded acoustic emission sensors
Always-on sparse event wake-up detectors: A Review
Features and Always-On Wake-Up Detectors for Sparse Acoustic Event Detection
Low-Power Sensor Interface with a Switched Inductor Frequency Selective Envelope Detector
Verifying sensitivity of a sensor system for logging xylem’s acoustic emissions related to drought stress
Close-Range Electromagnetic Tracking of Pulse Induction Search Coils for Subsurface Sensing
Close-Range Electromagnetic Tracking of Pulse Induction Search Coils for Subsurface Sensing
Passive Extraction of Signal Feature Using a Rectifier with a Mechanically Switched Inductor for Low Power Acoustic Event Detection
How thirsty the crops are: Emerging instrumentation for plant-based field measurement of water stress
Time-frequency features of grapevine’s xylem acoustic emissions for detection of drought stress
A Portable Planar Coil Array for Frequency-Domain Inductive Sensing of Metallic Objects
Embedded Front-End for Xylem Sap Velocity Measurement with Single Pulse-Heated NTC Probe
Innovating on top of I&M fundamentals for safer humanitarian demining
Designing Micro-Mechanical Cantilever Resonator Arrays for Wideband Detection of Ultrasonic Xylem Cavitation Emissions Related to Plant Water-Stress
Towards high frequency electromagnetic induction sensing of soil apparent electrical conductivity
Characterization and comparison of envelope detectors for wake-up sensor interfaces at audio frequencies
Weak Signal Detection Utilizing a Mechanically Switched Inductor
Hidden Markov Model-Based Asthmatic Wheeze Recognition Algorithm Leveraging the Parallel Ultra-Low-Power Processor (PULP)
Piezoelectric sensor front-end for energy- efficient acquisition of ultrasonic emissions related to water-stress in plants
Measurement of Weak Signal Energy at Acoustic Frequencies by using RMSHI as a Passive Conditioning Circuit
Comparative Study of Planar Coil EMI Sensors for Inversion-Based Detection of Buried Objects
Digital Eddy Current Probe for Tube Nondestructive Testing Using Binary Excitation
Embedding target discrimination capabilities into handheld detectors for humanitarian demining
Time-frequency pattern wake-up detector for low-power always-on sensing of acoustic events
A Programmable 3-Channel Acoustic Wake-up Interface Enabling Always-on Detection of Underwater Events within 20 μA
System-Level Power Consumption Analysis of the Wearable Asthmatic Wheeze Quantification
Experimental validation of energy harvesting- system availability improvement through battery
UWB Localization for Discrimination-Enabled Metal Detectors in Humanitarian Demining
Automatic compensation of primary field coupling for a frequency-domain electromagnetic induction sensor
Characterization of buried targets from planar electromagnetic induction sensor data in a moving reference frame
On feasibility of a rotating field eddy current sensor for nondestructive testing of ferromagnetic oil-well casings
Asthmatic Wheeze Detection from Compressively Sensed Respiratory Sound Spectra
Sensitivity Profile of Compact Inductive Sensor for Apparent Electrical Conductivity of Topsoil
Comparison of Power-Efficiency of Asthmatic Wheezing Wearable Sensor Architectures
Energy-Efficient Respiratory Sounds Sensing for Personal Mobile Asthma Monitoring
Low-power multichannel spectro-temporal feature extraction circuit for audio pattern wake-up
Robust Estimation of Metal Target Shape Using Time-Domain Electromagnetic Induction Data
Energy consumption and data amount reduction using object detection on embedded platform
Embedding target discrimination capabilities into commercial handheld metal detectors for humanitarian demining
On the applicability of search coils used in commercial handheld metal detectors for metallic target characterization
Spectroscopic identification of anti-personnel mine surrogates from planar sensor measurements
Estimating Directional Magnetic Polarizabilities of Metallic Objects Using Planar Time-Domain Electromagnetic Induction Sensor
Analytical modeling of rotating field eddy current sensor for nondestructive testing of tubes
Low-Power Gas Sensing using Single Walled Carbon Nano tubes in Wearable Devices
Design, Implementation, and Performance Evaluation of a Flexible Low-Latency Nanowatt Wake-Up Radio Receiver
Computation of the Eigenvalues for Bounded Domain Eddy Current Models with Coupled Regions
Wireless Sensor Node Modelling for Energy Effciency Analysis in Data-Intensive Periodic Monitoring
Mobile Air Quality Monitoring with Low-cost Sensors - Piloting Experience in Zagreb
Design of Sensor Node for Air Quality Crowdsensing
Stochastic Inversion of Two-Layer Soil Model Parameters from Electromagnetic Induction Data
Resource Management in Cooperative Multi-Agent Networks Through Self-Triggering
Towards Internet of Things for Event-Driven Low-Power Gas Sensing using Carbon Nanotubes
Evaluation of MOX Gas Sensor Transient Response for Low-Power Operation
Feel the Air - Urban Crowdsensing System
Model-Based Target Classification Using Spatial and Temporal Features of Metal Detector Response
Towards Autonomous Landmine Detection Using Mobile Robots and Metal Detectors: A Case Study
Benefits of Wake-up Radio in Energy-Efficient Multimodal Surveillance Wireless Sensor Network
Energy-efficient atmospheric CO concentration sensing with on-demand operating MOX gas sensor
Prototype of respiratory sounds monitoring system based on compressive sampling
OpenIoT: An open-source platform for the Internet of Things
Hidden Markov Model in Spectro-Temporal Tracking of Asthmatic Wheezing in Respiratory Sounds
Application of MSP430 and DSP C5000 in Mobile Patient and Environmental Monitoring
AENEAS : An Energy-Aware Simulator of Automatic Weather Stations
Simple linear inversion of soil electromagnetic properties from analytical model of electromagnetic induction sensor
Consensus-based Decentralized Resource Sharing between Co-located Wireless Sensor Networks
Performance Evaluation of IEEE 802.15.4 and 802.11 Protocols for Image Transmission in WSNs
Low-Power Wearable Respiratory Sound Sensing
Upgrading Metal Detection to Metallic Target Characterization in Humanitarian Demining
Urban Crowd Sensing Demonstrator: Sense the Zagreb Air
Journal of Physics : Conference Series "Sensors & their Applications XVII"
Empowering smartphone users with sensor node for air quality measurement
Analytical modelling of soil effects on electromagnetic induction sensor for humanitarian demining
Fundamentals of Electronic Measurements and Instrumentation - solved examples
Enhancing performance of wireless sensor networks in glacial environments using wake-up receivers
TeleAssistant – Assisted Living Platform Applied to Fall Detection
Developing advanced electromagnetic induction methods for landmine detection
Scaled Experimental Verification of Single-Well Induction Conductivity Measurement Through Nonmagnetic Casing
Osnove elektroničkih mjerenja i instrumentacije, Laboratorijske vježbe
From single point of measurement to distributed sensing in long-term glacier monitoring
Active induction balance method for metal detector sensing head utilizing transmitter-bucking and dual current source
Wireless sensor network for berth supervision in marinas
Kontinuirani monitoring respiratornog statusa bežičnim putem u kontroli astme
Towards continuous wheeze detection body sensor node as a core of asthma monitoring system
Wireless sensor node for respiratory sounds monitoring
Monitoring respiratory sounds: Compressed sensing reconstruction via OMP on Android smartphone
Analytic comparison of wake-up receivers for WSNs and benefits over the wake-on radio scheme
Induction Conductivity Measurement of Surrounding Low-Conductive Medium From Copper Tube — Experimental Verification
Application of stochastic inversion to casing effect correction in through casing induction logging
Fundamentals of electronic measurements and instrumentation - Solved problems and laboratory exercises
Measurement of rock resistivity using inductive method in a cased well
MasliNET : a Wireless Sensor Network based Environmental Monitoring System
Extending Lifetime of Battery Operated Wireless Sensor Node With DC-DC Switching Converter
Stochastic Inversion Approach to Measurement of Tube Properties Using Remote Field Technique
Reducing Power Consumption of Image Transmission over IEEE 802.15.4/ZigBee Sensor Network
Lumped Representation in Inductive Measurement of Metal Casing Properties
Challenges in electronic instrumentation for inductive rock resistivity measurement through well casing
An Energy Efficient Multimodal Wireless Video Sensor Network with eZ430-RF2500 modules
Entrepreneurship education at University of Zagreb Faculty of Electrical Engineering and computing
Novel and low-cost temperature compensation technique for piezoresistive pressure sensors
Model-based stochastic inversion of coil impedance for determination of tube inner radius and electromagnetic properties
Electromagnetic gauge of tube inner radius compensated for material properties and coil radial offset
Wireless automatic water meter reading system
Challenges in Electronic Instrumentation for Inductive Rock Resistivity Measurement through Well Casing
On Feasibility of Inductive Conductivity Measurement of Formation Surrounding a Metal Casing
Noise Analysis of the Pulse-Width Modulator for Quasi-Digital Sensors
Analysis of individual PEM fuel cell operating parameters for design of optimal measurement and control instrumentation
A Novel Approach to Wheeze Detection
Analysis of individual PEM fuel cell operating parametars
Electronic Instrumentation - Laboratory notebook and examples
Analytical modelling in low-frequency electromagnetic measurements of steel casing properties
A framework for low data rate, highly distributed measurement systems
Compensation of coil radial offset in single-coil measurement of metal tube properties
A digital signal processing technique for pulsed electromagnetic inspection of steel tubes
A Sensor Signal Digitalization Module for High-Temperature Environment Applications
HiTEmp - Hightemperature electronics and instrumentation virtual library
Validation of a Coil Impedance Model for Simultaneous Measurement of Electromagnetic Properties and Inner Diameter of a Conductive Tube
A Model Based Design of Low-Frequency Electromagnetic Systems for Metal Tube Inspection Applications
Thermal uprating of a mixed signal microcontroller
Automated instrumentation
Pulsed eddy current based electronic tool for nondestructive inspection of oil-well casing
Accuracy Evaluation of an Electromagnetic Method for Conductive Tube Inspection
Inspection Tool for Harsh Environment Operation Utilizing Pulsed Remote Field Technique
An application of a coil impedance model in eddy-current nondestructive testing
A Procedure for Compensation of Electromagnetic Properties in RFEC Inspection of Metal Tubes
A system identification approach to the modelling of pulsed eddy-current systems
A digital tachometer for high-temperature telemetry utilizing thermally uprated commercial electronic components
Single-coil method for simultaneous measurement of multiple parameters of a metal tube
A low-power automated measurement system for pulsed eddy current based inspection of oil-well casing
Modeling of pulsed eddy-current measurement of hard carbide layer thickness
A High-Temperature Low-Cost Rotational Speed Transducer for Oil-Well Telemetry
Pulsed Eddy-Current Nondestructive Testing of Ferromagnetic Tubes
Validation of a Coil Impedance Model for Simultaneous Measurement of Electromagnetic Properties and Inner Diameter of a Conductive Tube
Telemonitoring for Early Asthma Detection in Children
Applicability of the remote-field technique to contactless investigation of tissue electrical conductivity
Electronic Instrumentation - Laboratory notebook and examples
Pulsed remote field technique in ferromagnetic tube wall thickness and inner diameter measurement
Evaluation of use of information technology for the benefit of individuals with spinal cord injury
Pulsed eddy current nondestructive testing
Smart sensor systems
Transducer interface for multichannel wired telemetry in high temperature environment
Towards a feasible telemonitoring system to support asthma patients
International programs in BME education - needs and opportunities
Measurement of ferromagnetic tube wall thickness using pulsed remote field technique
A system for measurement forces in feet and crutches during normal na pathological gait
Proceedings of the International Federation for Medical & Biological Engineering Medicon 2001 - Part 2
Proceedings of the International Federation for Medical & Biological Engineering Medicon 2001 - Part 1
Diversity techniques for mobile optical biotelemetry
Measurement system for vertical force testing during normal and pathological gait
Croatian R&D infrastructure and international collaboration
A low-power wireless interface for human gait assessment
Recent advances and trends in infrared biotelemetry
Enhancement of Infrared Biotelemetry for Monitoring Ambulatory Patients over Wide Areas.
Enhancement of infrared biotelemetry for monitoring ambulatory patients over wide areas
Gait pattern classification using measured vertical force data
Low Power Telemetry Transmitters for Measurement of Physiological Parameters
Multireceiver infrared biotelemetry for monitoring ambulatory patients in biomechanical experimets
A pulse driven low-power capacitive force transducer
Plethysmorgaphy Measurements using Short Current Pulses with Low-Duty Cycle
A System for Measuring Forces in the Legs and Crutches from Ambulatory Patients
A Computer Based Vertical Force Monitoring and Anaysis System for Gait Evaluation
Optimization of Infrared Biotelemetry Systems
Multisegmented Capacitive Transducer for Force Measurement in the Legs
The Computerized Force Measurement System in Gait Analysis of Injured
Computer analysis of the silent period in myoelectric signal in clinical dentistry
Biography
Vedran Bilas was born in Makarska in 1968. He received Dipl.Eng., M.Sc. and Ph.D. degrees in electrical engineering from the University of Zagreb, Faculty of Electrical Engineering and Computing (FER), Zagreb, Croatia, in 1991, 1995 and 1999, respectively.
From January 1992 he is working at the Department of Electronic Systems and Information Processing at FER. In June 2010 he was promoted to Full Professor. He participated in 7 scientific projects financed by the Ministry of Science, Education and Sports of the Republic of Croatia, 1 PoC BICRO project, 1 COST project and 2 EU FP7 projects. Currently he is a project leader of research projects: "Enabling Inductive Metal Characterisation in Non-cooperative Soils " financed by the Find a Better Way foundation from United Kingdom and „Enhancing research and development of energy-efficient networked sensor systems“ funded by Swiss National Science Fundation., He published more than 100 papers in journals and conference proceedings in the area of electromagnetic inductive methods, electronic systems for harsh environment and smart sensors and sensor networks.
Prof. Bilas is a member of IEEE and a member of the Croatian Society for Biomedical Engineering and medical Physics. He participated in 10 conference international programs committees, he is member of a journal editorial board and he serves as a technical reviewer for various international journals. He received silver medal "Josip Lončar" from FER for outstanding Ph.D. theses in 2000 and IEEE Croatia Section Outstanding Educator Award in 2011.
Teaching
University undergraduate
- Electronics 2 (Lecturer in charge)
- Electronics 2 (Lecturer in charge)
- Electronic Systems (Lecturer in charge)
- Electronic Systems (Lecturer in charge, Lecturer in charge)
- Fundamentals of Electronic Measurements and Instrumentation (Lecturer in charge)
- Management in Engineering (Lecturer in charge)
- Management in Engineering (Lecturer in charge)
- Project (Lecturers)
- Project C (Lecturers)
- Project E (Lecturers)
- Software Design Project (Lecturers)
University graduate
- Building Blocks of Embedded Electronics (Lecturer in charge)
- Electronic Instrumentation (Lecturer in charge)
- Electronic Instrumentation (Lecturer in charge)
- Laboratory of Electronic and Computer Engineering 2 (Lecturer in charge)
- Multisensor Systems for Monitoring and Control of Physiological Functions (Lecturer in charge)
- Networked Sensors (Lecturer in charge)
- Technology Entrepreneurship (Lecturer in charge)
- Technology Entrepreneurship (Lecturer in charge)
- Graduation Thesis (Lecturers)
- Master Project (Lecturers)
- Mentored Seminar (Lecturers)
- Presentation Seminar (Lecturers)
- Project (Lecturers)
- Project (Lecturers)
- Project (Lecturers)
- Seminar (Lecturers)
Postgraduate doctoral study programme
- Biomonitoring systems (Lecturer in charge)
- Seminar on Generic Skills - Seminar on Entrepreneurship (Lecturer in charge)
- Smart Sensor Networks (Lecturer in charge)
Postgraduate spec. study
- Innovation management (Lecturer in charge)
- Networked sensors, sensors data and application in insurance (Lecturer in charge)
Competences
-
Aerospace and electronic systems
Telemetry Biomedical telemetry -
Components, packaging, and manufacturing technology
Electronic components Transducers -
Consumer electronics
Ambient intelligence Smart homes Low-power electronics -
Engineering in medicine and biology
Biomedical engineering -
Engineering management
Entrepreneurship Commercialization -
Sensors
Intelligent sensors Sensor systems and applications -
Signal processing
Amplifiers -
Circuits and systems
Operational amplifiers Analog circuits Thermal noise Circuit simulation Electronic circuits Linear circuits Passive circuits -
Computers and information processing
Data acquisition Data conversion -
Instrumentation and measurement
Impedance Inductance