List of laboratory equipment

Oscilloscopes:

R&S RTO2044 - Oscilloscope 4 channels, 4 GHz, 20 GS/s

R&S RTO2004 - Osciloskop 4 kanala, 600 MHz, 10 GS/s

Yokogawa DLM4038 - Oscilloscope, 8 channels, 350 MHz

Agilent/Keysight MSO7034B - Mixed signal oscilloscope, 350 MHz

Tektronix 11801B - Digital sampling oscilloscope with 20 GHz TDR heads

 

Power supplies:

Sorensen SGI 800x13 - DC power supply, 800 V, 12.5 A, 10 kW, IEEE-488 

Agilent/Keysight 6030A - System Autoranging DC Power Supply, 200V, 17A

Agilent/Keysight E3649A, 0-35 V, 1.4 ili 0-60 V, 0.8 A, 100 W, 2 CH 

Agilent/Keysight 6629A - Precision System Power Supply, 50W, 4 outputs

SRS PS350 - hihgh voltage power supply, 5 kV, 25W (5 mA), SRS - Stanford Research Systems

 

Electronic loads:

Agilent/Keysight 6060B - electronic load, 3 - 60 V, 0 - 60 A, 300 W

Agilent/Keysight N3301A i N3305A - electronic load 0-150 V, 0-60 A, 500 W

 

RF equipment:

R&S ZNB8 - VNA 9 kHz to 8.5 GHz, 4-port

R&S ZVB8 - VNA 300 kHz to 8 GHz

R&S ESRP3 - EMI receiver 9 kHz to 3.6 GHz

R&S SMIQ03B - signal generator 300 kHz to 3 GHz with options B5 B11 B20 B45

Agilent/Keysight E4421B - signal generator 250 kHz to 3 GHz 

R&S FSP7 - spectrum analizer, 7 GHz

AR 30W1000B - Amplifier Research (AR) RF amplifier, 30 W minimum @3 dB compression, 1 MHz do 1 GHz, 30 dB gain (minimum)

AR 1W1000 - Amplifier research amplifier, 1 W, 100 kHz to 1 GHz, 30 dB gain (minimum)

FCC-TEM-JM2 - TEM cell, 0 to 1650 MHz

GTEM 250A-SAE - Teseq GTEM cell, 100 W input power, meets SAE 1752/3, IEC 62132-2, IEC 61967-2 standards

UBBV1 - Aaronia RF preamplifier,  1 MHz - 1 GHz, 40 dB 

RPR2006C - RadioPower RF power meter, 9 kHz to 6 GHz, -55 dBm to +10 dBmBicoLOG 20300X - Aaronia biconic antenna, 20 MHz do 3 GHz, LNA also included

4-TR - antenna tripod, ETS-Lindgren 

Aaronia PBS 1 - RF near field probe set up to 9 GHz 

LLA (Large Loop Antenna) system, 300 kHz to 30 MHz EMC measurements

ZFRSC-42-S+ - 2-way 0 deg resistive power splitter DC - 4200 MHz, Mini-Circuits

 

Miscellaneous equipment:

Keysight 3458A - digital multimeter 8.5 digits 

Keysight 34410A - digital multimeter 6.5 digits 

Agilent/Keysight 33522B - arbitrary waveform generator,  2 channels, 30 MHz, 40 ps jitter

HP/Agilent 8165A - signal generator, 1 mHz to 50 MHz

HP/Agilent 214B - power pulse generator

NI setup for AD converter testing - measurement systems based on NI PXI-4461-24 Bit Sigma-Delta ADC's, 204.8 kS/s

HP/Agilent 4145B - semiconductor Device Analyzer

Fraunhofer-IZM current sensor, range +/-60 A, sensitivity is 9.6 mV/A, 3dB bandwidth 150kHz to 500MHz

Agilent/Keysight N2790A - high-voltage differential probe, 100 MHz

Keysight N2793A - 800 MHz differential probe

Tektronix CT1 - current probe 

Tektronix CT6 - current probe 

Tektronix AM503A - current probe amplifier and probe

NI GPIB-USB-HS+ - NI GPIB-USB-HS interface, with NI-488.2  

 

Specialized equipment:

WGD401 - programmable thermal chamber, -40 deg C to +150 deg C, test area 400 x 500 x 600 mm3

TPT HB16 wirebonder - uređaj za spajanje čipova na pakiranje/podlogu, wedge/ball bonding 

Langer BPS203 - ESD burst station, according to IEC 61000-4-2

On-wafer prober - on-wafer measurement system, positioners and probe arms for RF measurements

On-PCB prober - on-PCB (printed circuit board) measurement system, positioners, 1-mm pitch GS/SG probes 

Hot plate 12" x 12" (30 cm x 30 cm), Echotherm, 230 VAC, ceramic, programmable

Extech EA15 - dual input thermometer and datalogger

New Focus 1580-B - amplified photoreceiver, DC to 12 GHz