prof. dr. sc. Adrijan Barić

Research associate, Department of Electronics, Microelectronics, Computer and Intelligent Systems

Consultations:

Tuesday 1pm to  2 pm

Thursday 1pm to  2 pm

Location:
Public phone number:
00385-1-6129-913
Internal phone number:
413

Analysis and Compensation of Stress Effects on CMOS Reference Current Sources

Žamboki, Andro; Gočan, Leo; Mikulić, Josip; Schatzberger, Gregor; Marković, Tomislav; Barić, Adrijan
2023.

Stress-dependent MOSFET Model for use in Circuit Simulations

Žamboki, Andro; Gočan, Leo; Bako, Niko; Mikulić, Josip; Schatzberger, Gregor; Marković, Tomislav; Barić, Adrijan
2023.

Low-Power Frequency-Locked Loop Circuit with Static Frequency Offset Cancellation

Gočan, Leo; Žamboki, Andro; Bako, Niko; Mikulić, Josip; Schatzberger, Gregor; Marković, Tomislav; Barić, Adrijan
2023.

Low-Power Frequency-Locked Loop Circuit with Short Settling Time

Žamboki, Andro; Gočan, Leo; Bako, Niko; Mikulić, Josip; Schatzberger, Gregor; Barić, Adrijan
2022.

Automated testing of ARM Cortex based SoC with I3C interface and temperature sensor

Golubic, Mario ; Kundrata, Jurica ; Skeledzija, Ivan ; Ciaglia, Dimitri ; Pages, Nicolas ; Fellner, Johannes ; Baric, Adrijan
2022.

EMI and Voltage Ripple Co-Optimization of a Spread- Spectrum Controller in Buck Converters

Kundrata, Jurica ; Skeledžija, Ivan ; Barić, Adrijan
2022.
IEEE access

Methodology for Blockwise Behavioral Modeling of ICs for Narrow-Band RF Interference Injection

Magerl, Marko ; Stockreiter, Christian ; Baric, Adrijan
2022.
IEEE transactions on electromagnetic compatibility

1- MHz Voltage-controlled Ring Oscillator Designed in 180-nm CMOS Technology for Implementation in Phase-locked Loop

Traživuk, Alma ; Barić, Adrijan
2022.

Ring Oscillator Based Smart Temperature Sensor Using All-Digital Sigma-Delta Modulator

Tolic, Ivan Porin ; Schatzberger, Gregor ; Baric, Adrijan
2022.

On-chip conducted emissions sensor

Sabljak, Luka
2022.

Voltage Regulation in an Integrated Controller of a Spread-Spectrum-Clocked Buck Converter

Kundrata, Jurica ; Skeledzija, Ivan ; Baric, Adrijan
2022.

Low-Power Frequency-Locked Loop Circuit with Short Settling Time

Žamboki, Andro; Gočan, Leo; Bako, Niko; Mikulić, Josip; Schatzberger, Gregor; Barić, Adrijan
2022.

Meta-stability of Behavioural Models of Integrated Circuits with DC and RF Sub-Models

Magerl, Marko ; Stockreiter, Christian ; Barić, Adrijan
2022.

Methodology for block-wise behavioural modelling of integrated circuits for electromagnetic compatibility applications

Magerl, Marko
2022.

A Standalone Graph-Theory Based Tool for Full-Chip ESD Verification

Galic, Vlatko ; Wieers, Aarnout ; Gillon, Renaud ; Baric, Adrijan
2022.
IEEE transactions on electromagnetic compatibility

Decoupling Analog Conservative Connections Using Waveform Relaxation Interface

Alma Traživuk, Andre Alberts, Adrijan Barić, Vladimir Čeperić
2021.

Particle filter implemented as a hardware accelerator in Cortex-M core periphery

Kundrata, Jurica ; Tomic, Dubravko ; Maretic, Ivan ; Baric, Adrijan
2021.

Jitter-Based Reconstruction Of Transmission Line Pulse Using On-Chip Sensor

Narayanan, Bhuvnesh ; Weiss, Bernhard ; Mandic, Tvrtko ; Baric, Adrijan
2021.

Post-Manufacturing Process and Temperature Calibration of a 2-MHz On-Chip Relaxation Oscillator

Mikulic, Josip ; Schatzberger, Gregor ; Baric, Adrijan
2021.
IEEE transactions on circuits and systems. I, Regular papers

Verification of the Legacy Compatibility of the MIPI I3C Master

Golubic, Mario ; Kundrata, Jurica ; Baric, Adrijan
2021.

High-Frequency Characterization and Parametrized Modeling of DC-Biased Surface-Mount Ferrite Beads for EMI Suppression Applications

Bačmaga, Josip ; Štimac, Hrvoje ; Gillon, Renaud ; Barić, Adrijan
2020.
IEEE transactions on electromagnetic compatibility

Design of a multi-sensor system based on FPGA and processor core

Sorić, Tin
2020.

Design of frequency divider and phase-frequency detector in 180-nm CMOS technology

Žamboki, Andro
2020.

Comparison of Pearson correlation coefficient and distance correlation in Correlation Power Analysis on Digital Multiplier

Kundrata, Jurica ; Fujimoto, Daisuke ; Hayashi, Yuichi ; Barić, Adrijan
2020.

Design of voltage controlled oscillator based on ring oscillator in 180-nm CMOS technology

Gočan, Leo
2020.

Combined Series and Shunt Characterization for Accurate Resonant Frequency Extraction and Circuit Modelling of Surface-Mount Inductors

Bačmaga, Josip ; Štimac, Hrvoje ; Barić, Adrijan
2020.

High-Frequency Characterization and Parametrized Modeling of DC-Biased Surface- Mount Ferrite Beads for EMI Suppression Applications

Bačmaga, Josip ; Štimac, Hrvoje ; Gillon, Renaud ; Barić, Adrijan
2020.
IEEE transactions on electromagnetic compatibility

Design of a gesture recognition system based on FPGA and processor core

Furlan, Jan
2020.

Implementation of a power supply side-channel attack on FPGA-based neural network

Galić, Mirko
2020.

Semi-Analytical Estimation of On-Chip Intertwined Rectangular Transformer Parameters in 180 nm CMOS Technology

Brezovec, Ivan ; Mikulić, Josip ; Schatzberger, Gregor ; Barić, Adrijan
2020.

Design of frequency divider and phase-frequency detector in 180 nm CMOS technology

Fogec, Tin
2020.

Methodology for Characterization and Modelling of DC-Biased Surface-Mount Ferrite Power Inductors

Bačmaga, Josip ; Štimac, Hrvoje ; Barić, Adrijan
2020.

Design of charge pump and low-pass filter in 180-nm CMOS technology

Sabljak, Luka
2020.

Design and Comparison of Resonant and Non-Resonant Single-Layer Microwave Heaters for Continuous Flow Microfluidics in Silicon-Glass Technology

Markovic, Tomislav ; Ocket, Ilja ; Baric, Adrijan ; Nauwelaers, Bart
2020.
Energies (Basel)

Methodology for Characterization of Temperature and Power Losses of Inductors in DC/DC SMPS

Bačmaga, Josip ; Mandić, Tvrtko ; Barić, Adrijan
2020.

Chip-Level ESD Verification Using Graph-Theory Based Approach

Galic, Vlatko ; Wieers, Aarnout ; Gillon, Renaud ; Baric, Adrijan
2019.

Differential electro-optical equivalent circuit model of a vertical-cavity surface-emitting laser for common-mode rejection ratio estimation

Štimac, Hrvoje ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2019.
Journal of lightwave technology

Overview of EMC related activities at University of Zagreb

Barić, Adrijan
2019.

Common-mode rejection ratio characterisation of a broadband electro-optical differential ESD voltage probe

Štimac, Hrvoje ; Gillon, Renaud ; Barić, Adrijan
2019.
Electronics letters

Multisegment Multiconductor Transmission Line Model of High-Current Card-Edge Connectors With Analytically Calculated Model Parameters

Blečić, Raul ; Bako, Niko ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2019.
IEEE transactions on electromagnetic compatibility

Sequential Build-Up of Broadband Equivalent Circuit Model for Low-Cost SMA Connectors

Mandić, Tvrtko ; Magerl, Marko ; Barić, Adrijan
2019.
IEEE transactions on electromagnetic compatibility

Automated Measurement and Control of Temperature and Ambient Illumination

Eugen, Peći
2019.

Time-Domain Response Simulation of Incident Field Coupling to Transmission Lines

Mandić, Tvrtko ; Op’t Land, Sjoerd ; Barić, Adrijan
2019.

A 1-MHz Relaxation Oscillator Core Employing a Self-Compensating Chopped Comparator Pair

Mikulić, Josip ; Schatzberger, Gregor ; Barić, Adrijan
2019.
IEEE transactions on circuits and systems. I, Regular papers

Conducted Emissions for Different Conversion Ratios of GaN-Based Synchronous Buck Converter

Bačmaga, Josip ; Blečić, Raul ; Barić, Adrijan
2019.

Measurements of Conducted EM Emissions for Different Dead Times of the Control Signals of Synchronus Buck Converters

Bačmaga, Josip ; Blečić, Raul ; Barić, Adrijan
2019.

Application-Specific VSWR Optimized Design of IC- Stripline

Mandić, Tvrtko ; Barić, Adrijan
2019.

Frequency-Domain Characterization and Modelling of a Multi-Layer Ceramic Capacitor for RF Applications

Štimac, Hrvoje ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2019.

Design of Sense Amplifiers for Non-Volatile Memory

Tolić, Ivan Porin ; Mikulić, Josip ; Schatzberger, Gregor ; Barić, Adrijan
2019.

Analysis of Re-radiated RF Harmonic Disturbance Caused by Integrated Circuit Input Pin Nonlinearity

Magerl, Marko ; Stockreiter, Christian ; Barić, Adrijan
2019.

Measurement of living space quality parameters

Fumić, Domagoj
2019.

Admittance Parameter Based Lumped Element Model of a VCSEL for Differential Analog Signal Transfer

Štimac, Hrvoje ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2019.

IC & EMC Lab activities in DC-DC converter design

Barić, Adrijan
2019.

Characterization of Digital IC for Sub-Nanosecond Dead-Time Adjustment Used in Synchronous DC-DC Converters

Bačmaga, Josip ; Blečić, Raul ; Voaden, Roger ; Barić, Adrijan
2018.

Design methodology for improved electromagnetic compatibility of switched-mode power converters

Blečić, Raul
2018.

High-Frequency Model of a Setup for Time-Domain Inductor Characterization

Bačmaga, Josip ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2018.

Modelling of a transmission line pulse measurement setup

Magerl, Marko ; Courivaud, Bertrand ; Stockreiter, Christian ; Barić, Adrijan
2018.

Stability Analysis of Black-Box Models of Integrated Circuits for DPI Simulations

Magerl, Marko ; Stockreiter, Christian ; Barić, Adrijan
2018.

Improved Estimation of Radiated Fields of Unintentional Radiators by Correction of the Impedance Mismatch Between a Transverse Electromagnetic Cell and a Hybrid Coupler

Blečić, Raul ; Štimac, Hrvoje ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2018.
IEEE transactions on electromagnetic compatibility

Application of Ferrite Layers in Low-profile OLED Drivers

Kundrata, Jurica ; Barić, Adrijan
2018.
IET Power Electronics

Modelling of microcontroller conducted emissions

Penić, Fran
2018.

Full-Chip ESD Simulations in Bipolar Technology

Galic, Vlatko ; Wieers, Aarnout ; Gillon, Renaud ; Baric, Adrijan
2018.

Adaptive Algorithm for Sampling Nonlinear Circuit Behaviour in Time-Domain

Magerl, Marko ; Stockreiter, Christian ; Eisenberger, Oliver ; Barić, Adrijan
2018.

Methodology for block-wise behavioural modelling of integrated circuits for electromagnetic compatibility applications

Magerl, Marko ; Baric, Adrijan
2018.

Analysis of Sources of Electromagnetic Interference of Resonant Switched-Mode Power Converters

Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2018.

Reaching the Steady-State in DPI Simulations of Integrated Circuits

Magerl, Marko ; Stockreiter, Christian ; Barić, Adrijan
2018.

A 1-MHz Relaxation Oscillator Core Employing a Self-Compensating Chopped Comparator Pair

Mikulić, Josip ; Schatzberger, Gregor ; Barić, Adrijan
2018.

Design and modelling of planar inductor arrays and electromagnetic compatibility analysis of organic light emitting diode luminaries

Kundrata, Jurica
2018.

High-Frequency Model of a Measurement Setup for Time-Domain Characterization of Power Inductors Used in SMPS

Bačmaga, Josip ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2018.

Broadband Equivalent Circuit Model of VCSEL Electrical Characteristics for Differential Applications

Štimac, Hrvoje ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2018.

Modelling and validation of high-current surface- mount current-sense resistor

Bačmaga, Josip ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2018.

Influence of RF Disturbance Phase on Amplifier DPI Characteristics

Magerl, Marko ; Stockreiter, Christian ; Barić, Adrijan
2017.

An 11-uW, 9-bit fully differential, cyclic/algorithmic ADC in 0.13 μm CMOS

Bako, Niko ; Fricke, Kyle ; Sobot, Robert ; Barić, Adrijan
2017.
International journal of circuit theory and applications

Radiated Emissions of an Array of OLED Luminaries

Kundrata, Jurica ; Barić, Adrijan
2017.
IEEE transactions on electromagnetic compatibility

Optimization of IC-Stripline Performance by Response Surface Space-Mapping Technique

Mandić, Tvrtko ; Gillon, Renaud ; Barić, Adrijan
2017.
IEEE transactions on electromagnetic compatibility

A Modular and Interactive OLED-Based Lighting System

Monté, Ann ; Kundrata, Jurica ; Schram, Jeroen ; Cauwe, Maarten ; Barić, Adrijan ; Doutreloigne, Jan
2017.
Leukos

Broadband equivalent circuit model of VCSEL electrical characteristics for differential applications

Štimac, Hrvoje ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2017.

EMC-Oriented Design of Output Stage of Synchronous Buck Converter

Blečić, Raul ; Bačmaga, Josip ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2017.

Characterization of measurement system for high- precision oscillator measurements

Brezovec, Ivan ; Magerl, Marko ; Mikulić, Josip ; Schatzberger, Gregor ; Barić, Adrijan
2017.

High-Frequency Modelling of Surface-Mount Power Inductor and Current-Sense Resistor Used in Switching DC-DC Converters

Bačmaga, Josip ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2017.

Design of Low Power Wireless Sensor Nodes

Budimir, Ninoslav
2017.

Measurements of Coupling Between a Synchronous Buck Converter and a TEM Cell

Blečić, Raul ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2017.

Programmable Digital IC for Sub-Nanosecond Dead- Time Adjustment Used in Synchronous Switching DC- DC Converters

Bačmaga, Josip ; Blečić, Raul ; Barić, Adrijan
2017.

Tapered Structures for Frequency Characterization of Wide-Terminal Current-Sense Resistor

Bačmaga, Josip ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2017.

Reaching the Steady-State in DPI Simulations of Integrated Circuits

Magerl, Marko ; Stockreiter, Christian ; Barić, Adrijan
2017.

Active-Learning Implementation Proposal for Course Electronics at Undergraduate Level

Mandić Tvrtko ; Barić, Adrijan
2017.

Echo state networks for black-box modeling of integrated circuits

Magerl, Marko ; Čeperić, Vladimir ; Barić, Adrijan
2016.
IEEE transactions on computer-aided design of integrated circuits and systems

High-Frequency Modelling of Surface-Mount Power Inductor Used in Switching DC-DC Converters

Bačmaga, Josip ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2016.

Relaxation oscillator calibration technique with comparator delay regulation

Mikulić, Josip. ; Schatzberger, Gregor ; Barić, Adrijan
2016.

Infrared protection system for high-voltage testing of SiC and GaN FETs used in DC-DC converters

Hormot, Filip ; Bačmaga, Josip ; Barić, Adrijan
2016.

Design and Analysis of Switch-Mode and Linear Regulators

Šušak, Dario
2016.

Solar Energy Harvesting for Power Supply of Wireless Sensor Network

Malenica, Martin
2016.

Minimization of maximum electric field in high- voltage parallel-plate capacitor

Blečić, Raul ; Diduck, Quentin ; Barić, Adrijan
2016.

Radiation of Small Loop Above Finite Image Plane

Blečić, Raul ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2016.
IEEE transactions on electromagnetic compatibility

Contactless Temperature Measurement System

Subotić, Daniel
2016.

Broadband radiofrequency design of a laser diode bias circuit

Štimac, Hrvoje ; Gillon, Renaud ; Barić, Adrijan
2016.

Adaptive Algorithm for Sampling Nonlinear Circuit Behaviour in Time-Domain

Magerl, Marko ; Stockreiter, Christian ; Eisenberger, Oliver ; Barić, Adrijan
2016.

Radiation of Synchronous Buck Converter Modelled by Three Magnetic Moments and Combined with SPICE Simulations

Blečić, Raul ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2016.

Software for conducting electromagnetic compatibility measurements

Fajdetić, Filip
2016.

Effects Influencing Repeatability of Direct Power Injection Measurements

Fajdetić, Filip ; Mikić, Mislav ; Mandić, Tvrtko ; Barić, Adrijan
2015.

3D EM Simulations and Analysis of In-package Metal Plate Interconnecting High-side and Low- side FETs of DC-DC Converter

Bačmaga, Josip ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2015.

Design and characterization of a step-down switched-mode power converter based on the regulator MC34063A

Mikić, Mislav ; Grancarić, Rebecca ; Blečić, Raul ; Barić, Adrijan
2015.
IEEE electromagnetic compatibility magazine

SPICE Analysis of RL and RC Snubber Circuits for Synchronous Buck DC-DC Converters

Blečić, Raul ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2015.

EMC-aware Design of a Planar Inductor for Low- profile OLED Drivers

Kundrata, Jurica ; Barić, Adrijan
2015.
IEEE transactions on power electronics

Design of Low Power LDO Voltage Regulator for RFID Applications

Mikulic, Josip ; Bako, Niko ; Baric, Adrijan
2015.

Building Interchangeable Black-Box Models of Integrated Circuits for EMC Simulations

Magerl, Marko ; Stockreiter, Christian ; Eisenberger, Oliver ; Minixhofer, Rainer ; Barić, Adrijan
2015.

Comparison of electrical and electromagnetic properties of a planar inductor

Kundrata , Jurica ; Barić, Adrijan
2015.

Radiation characteristics of small loop antenna above perforated finite image plane

Blečić, Raul ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2015.

DC/DC Converter Dead-Time Variation Analysis and Far-Field Radiation Estimation

Mandić, Tvrtko ; Blečić, Raul ; Gillon, Renaud ; Barić, Adrijan
2015.

Radiation of Input Decoupling Network Typically Used in Switching DC-DC Converters

Blečić, Raul ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2015.

Dual-channel Programmable Precise Time-delay Pulse Signal Generator for Synchronous DC-DC Converter Applications

Hormot, Filip ; Bačmaga, Josip ; Barić, Adrijan
2015.

Wireless Sensor Node System Based on Raspberry Pi Server

Škeva, Mateo
2015.

Evaluation of the Operation of Depletion-Mode SiC Power JFET in DC-DC Converter Applications

Bačmaga, Josip ; Bene, Kristijan ; Pejčinović, Branimir ; Barić, Adrijan
2014.

A symbolic regression-based modelling strategy of AC/DC rectifiers for RFID applications

Čeperić, Vladimir ; Bako, Niko ; Barić, Adrijan
2014.
Expert systems with applications

Sparse $\varepsilon$-tube Support Vector Regression by Active Learning

Čeperić, Vladimir ; Gielen, Georges ; Barić, Adrijan
2014.
Soft computing

Simple and Scalable Methodology for Equivalent Circuit Modeling of IC Packages

Mandić, Tvrtko ; Nauwelaers, Bart ; Barić, Adrijan
2014.
IEEE Transactions on Components Packaging and Manufacturing Technology

Software for Control of Near-Field Scanner

Fajdetić, Filip
2014.

Application of TEM Cell in Measurement of Electromagnetic Fields of Electronic Modules

Ivanuš, Krešimir ; Barić, Adrijan
2014.

OLED ageing modelling and compensation

Kundrata, Jurica ; Bandić, Damjan ; Barić , Adrijan
2014.

Embedded inductor design and electromagnetic compatibility issues

Kundrata, Jurica ; Damjan , Bandić ; Barić , Adrijan
2014.

Comparison of Simulation and Measurements of Time- Domain Field-to-Line Coupling in TEM Cell

Mandić, Tvrtko ; Pejčinović, Branimir ; Barić, Adrijan
2014.

Compensation algorithm report

Kundrata, Jurica ; Damjan, Bandić ; Barić, Adrijan
2014.

Integrated Control System for 3D Printer

Subotić, Daniel
2014.

Intelligent backplane concept

Bandić, Damjan ; Kundrata, Jurica ; Barić, Adrijan
2014.

Pulse-Width Modulated Signals for Stepper Motor Control

Galić, Vlatko
2014.

Electro-optic Modulator for Large Analogue Broadband Signals

Magerl, Marko
2014.

Broadband Characterization of SMA Connectors by Measurements

Marko Magerl ; Tvrtko Mandić ; Adrijan Barić
2014.

Circuit Modelling of Printed Circuit Boards for a DC-DC Converter Design

Blečić, Raul ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2014.

IC-Stripline Design Optimization using Response Surface Methodology

Mandić, Tvrtko ; Gillon, Renaud ; Barić, Adrijan
2013.

Broadband Measurement System for fast Waveforms

Marković, Tomislav
2013.

Sensor of high-voltage and high-current electrostatic discharge on a chip

Granić, Luka Mate
2013.

ASK demodulator circuit design for RFID tags

Mikulić, Josip
2013.

A low-power, temperature and supply voltage compensated current starved ring oscillator

Bako, Niko ; Barić, Adrijan
2013.
Microelectronics journal

Advanced stepper motor control system

Debelec, Ivan
2013.

Designing a generator of electromagnetic field to test devices on electromagnetic compatibility

Bandić, Damjan
2013.

Field-To-Line Coupling Models Compared: Coupled Lines and Modified Taylor

Op't Land, Sjoerd ; Mandić, Tvrtko ; Ramdani, Mohamed ; Barić, Adrijan ; Perdriau, Richard ; Nauwelaers, Bart
2013.

Demonstration printed circuit board for EMC measurements

Mikić, Mislav
2013.

System for contactless temperature measurement and measurement of radiated electromagnetic power

Vrtarić, David
2013.

Broadband Detection of Radiating Moments using the TEM-cell and a Phase-calibrated Oscilloscope

Gillon, Renaud ; Bako, Niko ; Baric, Adrijan
2013.

Electromagnetic characterization of the Ferrite Polymer Composite (FPC) layers

Kundrata , Jurica ; Barić , Adrijan
2013.

Electromagnetic compatibility of a low-profile OLED- based lighting device

Kundrata, Jurica ; Barić, Adrijan
2013.

Design, development and analysis of test SiC cascode JFET circuit

Škeva, Mateo
2013.

Design of a planar inductor for a low-profile DC-DC converter

Kundrata, Jurica ; Barić, Adrijan
2013.

Modelling of Integrated Circuit Packages and Electromagnetic Coupling to Interconnects

Mandić, Tvrtko
2013.

System-ESD Validation of a Microcontroller with External RC-Filter

Steinecke, Thomas ; Unger, Markus ; Scheier, Stanislav ; Frei, Stephan ; Bačmaga, Josip ; Barić, Adrijan
2013.

Area-efficient differential Gaussian circuit for dedicated hardware implementations of Gaussian function based machine learning algorithms

Vrtarić, David ; Čeperić, Vladimir ; Barić, Adrijan
2013.
Neurocomputing

A Strategy for Short-Term Load Forecasting by Support Vector Regression Machines

Čeperić, Ervin ; Čeperić, Vladimir ; Barić, Adrijan
2013.
IEEE transactions on power systems

Modelling of Emissions of Integrated Circuits for EMC Simulations

Broznić, Andro
2013.

Black-box modelling of analogue and mixed-signal circuits in the time domain

Čeperić, Vladimir
2013.

Black-Box Modelling of AC-DC Rectifiers for RFID Applications Using Support Vector Regression Machines

Čeperić, Vladimir ; Georges, Gielen ; Barić, Adrijan
2013.

Broadband Measurement of the Magnetic Moment Normal to the Printed Circuit Board plane using TEM Cell and Phase Information

Blečić, Raul ; Bako, Niko ; Gillon, Renaud ; Barić, Adrijan
2013.

Black-box modelling of conducted electromagnetic immunity by support vector machines

Čeperić, Vladimir ; Georges, Gielen ; Barić, Adrijan
2012.

Programming interface for the controling of a stepper motors

Ćavar, Krešimir
2012.

Design of a 10-bit digital to analog converter in UMC 90 nanometer technology

Markulić, Nereo
2012.

A 2.5-GHz GaN power amplifier design and modeling by circuit-electromagnetic co-simulation

Broznić, Andro ; Blečić, Raul ; Barić, Adrijan
2012.

Symmetric two-stage compensated amplifier in 0, 35 micrometer silicon technology

Magerl, Marko
2012.

Design of operational amplifiers in 180-nm CMOS technology

Cecelja, Ozren
2012.

Influence of board geometries and external protection network configurations on the automotive microcontroller behaviour when exposed to system-related electrostatic discharge

Bačmaga, Josip
2012.

Characterizing the TEM Cell Electric and Magnetic Field Coupling to PCB Transmission Lines

Mandić, Tvrtko ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2012.
IEEE transactions on electromagnetic compatibility

A low-power fully differential cyclic 9-bit ADC

Bako, Niko ; Barić, Adrijan
2012.

A brief overview of the black-box behavioural modelling of electronic circuits for transient simulations

Čeperić, Vladimir ; Barić, Adrijan
2012.

Limitations of the CVSL Driver as Voltage Level Booster for Switching Capacitors in High-gain Charge Pumps

Vinko, Davor ; Švedek, Tomislav ; Barić, Adrijan
2012.

Electrical and Thermal Analysis of an OLED Module

Jurica Kundrata ; Adrijan Barić
2012.

Stepper-motor control circuit

Pintarić, Dario
2012.

High-frequency integrated buck converter

Dugandžić, Marko
2012.

Sparse multikernel support vector regression machines trained by active learning

Čeperić, Vladimir ; Gielen, Georges ; Barić, Adrijan
2012.
Expert systems with applications

Black-Box Modelling of Conducted Electromagnetic Emissions by Adjustable Complexity Support Vector Regression Machines

Čeperić, Vladimir ; Gielen, Georges ; Barić, Adrijan
2012.

Ferrite Polymer Compound (FPC) test vehicle measurements

Kundrata, Jurica ; Barić, Adrijan
2012.

Electro-thermal and mechanical stress characterization of power electronic packages

Šodan, Vice
2012.

Analysis and modelling of bow-tie structure for measurement of impulse voltages and currents

Šever, Nikola
2012.

MODELLING OF EMISSIONS OF INTEGRATED CIRCUITS FOR EMC- SIMULATIONS

Krivak, Ivana
2012.

EMC analysis of LIN test-case

Levarda, Andrej
2012.

Analysis and measurement of radiated electromagnetic emissions in the frequency range from 9 kHz to 30 MHz

Simičić, Marko
2012.

Design of a planar inductor for DC-DC converter on flexible foil applications

Kundrata, J. ; Baric, A.
2012.

Temperature measurement system integrated on a chip

Šutalo, Mihael
2012.

Recurrent sparse support vector regression machines trained by active learning in the time-domain

Čeperić, Vladimir ; Gielen, Georges ; Barić, Adrijan
2012.
Expert systems with applications

BRUSHLESS DC MOTOR CONTROL SYSTEM VIA LIN INTERFACE

Bene, Kristijan
2012.

High-Voltage PMOS Transistor Model for Prediction of Susceptibility to Conducted Interference

Jović, Ognjen ; Maier, C. ; Barić, Adrijan
2011.
IEEE transactions on electromagnetic compatibility

Quadrature coupler and power divider circuit-EM co- simulation

Marković, Tomislav ; Blečić, Raul ; Barić, Adrijan
2011.

Susceptibility of integrated circuits to electromagnetic interference

Jović, Ognjen
2011.

Proceedings of the 8th International Workshop on Electromagnetic Compatibility of Integrated Circuits 2011


2011.

Design and Modelling of IC-Stripline Having Improved VSWR Performance

Mandić, Tvrtko ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2011.

Embedded Inductor Design and EMC Analysis

Kundrata, Jurica ; Barić, Adrijan
2011.

Response Surface Methodology for Modelling Lead Frame of IC Packages

Mandić, Tvrtko ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
2011.

High Frequency Cable Modeling

Bako, Niko ; Barić Adrijan
2011.

Full PCB circuit-electromagnetic simulations for high speed/RF applications

Blečić, Raul ; Barić, Adrijan
2011.

Modelling of EM Field Coupling to Transmission Lines and IC Packages

Mandić, Tvrtko ; Nauwelaers, Bart ; Barić, Adrijan
2011.

Planar inductor design report

Kundrata , Jurica ; Barić , Adrijan
2011.

A Low-Power Fully Differential 9-Bit C-2C Cyclic ADC

Bako, Niko ; Barić, Adrijan
2011.

S-parameter Approximation Using Rational Functions

Križan, Mario ; Barić, Adrijan
2011.

Gaussian circuit implemented in CMOS technology

Vrtarić, David
2011.

Quantifying TEM Cell Electric and Magnetic Field Coupling to Arbitrary Orientation of Microstrip Lines

Mandić, Tvrtko ; Gillon, Renaud ; Barić, Adrijan
2010.

Hotspot Evaluation of High-voltage MOSFET Drivers

Ivanković, Andrej
2010.

System for temperature testing of integrated circuits designed on chip

Bačmaga, Josip
2010.

Susceptibility Analysis of an IC Voltage Regulator to Conducted Electromagnetic Interference

Petrović, Sebastian
2010.

New Methodology on Electro-Thermal Characterization and Modeling of Large Power Drivers Using Lateral PNP BJTs

Rhayem, Joseph ; Vrbicky, Andrej ; Blečić, Raul ; Malena, Pavel ; Bychikhin, Sergey ; Pogany, Dionyz ; Wieers, Aarnout ; Barić, Adrijan ; Marnix, Tack
2010.

Design of Fully Differential Folded Cascode Operational Amplifier by the gm/ID Methodology

Bako, Niko ; Butković, Željko ; Barić, Adrijan
2010.

Extraction of equivalent lumped element via model

Križan, Mario ; Barić, Adrijan
2009.

Electro-thermal Measurements and Characterization of High Voltage / High Temperature Drivers

Blečić, Raul
2009.

Reduction of the influence of conducted electromagnetic interference on operational amplifier

Čizmar, Goran
2009.

Measuring and modelling of a PCB via structure

Križan, Mario ; Orlović, Joško ; Barić, Adrijan
2009.

Susceptibility of a Brokaw Bandgap to High Electromagnetic Interference

Jović, Ognjen ; Wilkening, Wolfgang ; Stuermer, Uwe ; Barić, Adrijan
2009.

Susceptibility of an AB Class Output Buffer to Conducted Electromagnetic Interference

Jović, Ognjen ; Wilkening, Wolfgang ; Barić, Adrijan
2009.

Susceptibility of PMOS Transistors under High RF Excitations at Source Pin

Jović, Ognjen ; Stuermer, Uwe ; Wilkening, Wolfgang ; Baric, Adrijan ; Maier, Christian
2009.

Modelling of Integrated Circuit Conducted Electromagnetic Immunity by Artificial Neural Networks

Čeperić, Vladimir ; Barić, Adrijan
2009.

Practical Simulation of TEM-cell Coupling to PCB Tracks in the Circuit Simulator

Gillon, Renaud ; Vanhee, Filip ; Mandić, Tvrtko ; Barić, Adrijan ; Catrysse, Johan
2009.

Equivalent Circuit Model of the TEM Cell Electric and Magnetic Field Coupling to Microstrip Lines

Mandić, Tvrtko ; Vanhee, Filip ; Gillon, Renaud ; Catrysse, Johan ; Barić, Adrijan
2009.

Estimation of sensitivity of electronic systems to conducted electromagnetic interference

Uzelac, Krunoslav
2009.

Analysis of electronic circuits under the influence of conducted electromagnetic interference

Draganović, Matija
2008.

Broad-Band Equivalent Circuit Modelling of Passive SMT Components Embedded in Conductor Backed Coplanar Waveguide Structures

Čeperić, Vladimir ; Pejčinović, Branimir ; Barić, Adrijan
2008.

Conducted Electromagnetic Emission Current Source Modelling by Artificial Neural Networks

Čeperić, Vladimir ; Barić, Adrijan
2008.

TEM Cell Simulations

Mandić, Tvrtko ; Barić, Adrijan
2008.

Package modelling

Mandić, Tvrtko ; Barić, Adrijan
2008.

Characterization of 8-pin Shrink Small Outline Package by Using Electromagnetic Simulations

Mandić, Tvrtko ; Barić, Adrijan
2008.

Behavioural Modelling of Circuits that Exhibit Chaotic Behaviour

Čeperić, Vladimir ; Čeperić, Ervin ; Barić, Adrijan
2008.

Bond wire modelling

Pongrac, Franjo
2007.

Modelling of On-Chip Spiral Inductors

Blečić, Raul ; Ivanković, Andrej ; Petrović, Sebastian ; Crnković, Boris ; Barić, Adrijan
2007.

Time-Domain Response Simulation of Multiconductor Transmission Lines Excited by an Incident Electromagnetic Field

Mandić, Tvrtko ; Čeperić, Vladimir ; Barić, Adrijan
2007.

Comparison of S-parameters Measured Using Time Domain Reflectometer and Vector Network Analyzer

Pejčinović, Branimir ; Čeperić, Vladimir ; Barić, Adrijan
2007.

Fast Transient Analysis of Incident Field Coupling to Multiconductor Transmission Lines

Mandić, Tvrtko, Barić, Adrijan
2007.

Symmetrical Transversal Electromagnetic Mode Cell

Čeperić, Vladimir ; Mandić, Tvrtko ; Barić, Adrijan
2007.

Simulations of Symmetrical Transverse Electromagnetic Cell

Čeperić, Vladimir ; Mandić, Tvrtko ; Barić, Adrijan
2007.

Modelling of passive SMD components in broad frequency region

Miletić, Domagoj
2007.

Design rules for utilizing conductor-backed co-planar waveguide lines on FR-4 substrate

Pejčinović, Branimir ; Čeperić, Vladimir ; Mandić, Tvrtko ; Barić, Adrijan
2007.

Analysis of conducted electromagnetic emissions in integrated circuits

Čeperić, Vladimir
2007.

Design and Use of FR-4 CBCPW Lines In Test Fixtures for SMD Components

Pejčinović, Branimir ; Čeperić, Vladimir ; Barić, Adrijan
2007.

EMC Aware Circuit Design and Optimizations

Čeperić, Vladimir ; Dalbelo-Bašić, Bojana ; Barić, Adrijan
2006.

Report on EMC Integrated Simulations

Čeperić, Vladimir ; Marković, Hrvoje ; Bako, Niko ; Barić, Adrijan ; Gillon, Renaud ; Jović, Ognjen ; Maier, Christian ; Heinisch, Holger
2006.

Software for automated set-up and testing of complex mixed-signal integrated circuits

Čeperić, Vladimir ; Barić, Adrijan
2006.

Design and optimization of LIN interface

Bako, Niko
2006.

Design and Optimization of Self-Biased Complementary Folded Cascode

Čeperić, Vladimir ; Butković, Željko ; Barić, Adrijan
2006.

Software tool 'EMC 1 Ohm/150 Ohm' for automated measurement of electromagnetic conducted emissions and data processing

Čeperić, Vladimir ; Barić, Adrijan
2006.

Influence of Packaging on the Oscillation Frequency of a High Voltage CMOS Quadrature LC Oscillator

Jović, Ognjen ; Čeperić, Vladimir ; Barić, Adrijan
2006.

Quadrature LC oscillator in 0.35 um CMOS technology

Jović, Ognjen
2006.

Predicting the results of conducted EMC tests: critical factors determining accuracy

Čeperić, Vladimir ; Barić, Adrijan ; Gillon, Renaud
2006.

Software tool 'EMC DPI' for testing immunity of integrated circuits according to the standard IEC 62132-4

Čeperić, Vladimir ; Barić, Adrijan
2006.

EMC test chip

Čeperić, Vladimir ; Marković, Hrvoje ; Bako, Niko ; Jović, Ognjen ; Barić, Adrijan
2006.

Design and Optimisation of Local Interconnected Network Interface

Bako, Niko ; Čeperić, Vladimir ; Barić, Adrijan
2006.

Electromagnetic compatibility interface for simulations in Cadence software environment

Šebo, Igor
2005.

EMC simulation tool for Cadence IC design environment

Šebo, Igor ; Čeperić, Vladimir ; Marković, Hrvoje ; Barić, Adrijan
2005.

The Influence of Supply Network Parasitics on the Conducted Electromagnetic Emissions

Marković, Hrvoje ; Čeperić, Vladimir ; Barić, Adrijan
2005.

EMC models and netlisting strategies

Čeperić, Vladimir ; Marković, Hrvoje ; Barić, Adrijan ; Gillon, Renaud ; Maier, Christian ; Heinisch, Holger
2005.

Two-to-One Multiplexer in 0.35 um CMOS Technology

Jović, Ognjen ; Bako, Niko ; Barić, Adrijan
2005.

Modeling of Analog Circuits by Using Support Vector Regression Machines

Čeperić, Vladimir ; Barić, Adrijan
2004.

Artificial Neural Networks in Modelling of Voltage Controlled Osillators With Jitter

Čeperić, Vladimir ; Barić, Adrijan ; Pejčinović, Branimir
2004.

Automatika


2004.

Modelling of SCFL Circuits

Čeperić, Vladimir ; Barić, Adrijan
2004.

Analysis and design of voltage controlled ring oscillators

Čeperić, Vladimir
2004.

Influence of Nonlinear MESFET Models on the Characterization of Resistive Mixers

Butković, Željko ; Barić, Adrijan
2003.

Simulations of GaAs Voltage Controlled Differential Ring Oscillators

Čeperić, Vladimir ; Barić, Adrijan
2003.

Comparison of Non-Linear MESFET Models over 1-12 GHz Frequency Range

Castelino, Johncy ; Wong, Phillip K. ; Sijerčić, Edin ; Pejčinović, Branimir ; Barić, Adrijan
2003.

Inductance Extraction

Kovač, Milivoj ; Barić, Adrijan
2003.

Lumped Elements De-embedding Procedure

Barić, Adrijan ; Pejčinović, Branimir
2003.

Analysis of digital modulation techniques

Ivanuš, Krešimir
2003.

Voltage Controlled Differential Ring Oscillator Based on the SCFL Delay Cell

Čeperić, Vladimir ; Barić, Adrijan
2003.

Partial Inductance Calculation in Microprocessor Interconnections

Kovač, Milivoj
2002.

Time Delay Extraction from Spectral Measurements of High-Speed Digital Cells

Marković, Hrvoje ; Čeperić, Vladimir ; Barić, Adrijan
2002.

Design and Optimization of Gallium-Arsenide Standard Cells - Registers

Marković, Hrvoje
2002.

Proceedings of the 9th IEEE International Conference on Electronics, Circuits and Systems - ICECS 2002


2002.

Optimization of a GaAs SCFL Buffer Cell

Šamšalović, Marko ; Marković, Hrvoje ; Marić, Nikica ; Butković, Željko ; Barić, Adrijan
2002.

Data structures and algorithms for inductance extraction in microprocessor interconnections

Vešligaj, Davor
2002.

Verification of the method for inductance extraction in microprocessor interconnections

Bajić, Marko
2002.

Design and Optimization of Gallium-Arsenide Standard Cells

Šamšalović, Marko
2002.

Sine-to-Pulse Input Conversion Cells for GaAs SCFL Digital Test Structures

Marić, Nikica ; Šamšalović, Marko ; Barić, Adrijan
2002.

High-Speed GaAs SCFL Digital Test Structures

Marković, Hrvoje ; Marić, Nikica ; Čeperić, Vladimir ; Barić, Adrijan
2002.

Design and Optimization of Gallium-Arsenide Standard Cells - Ring Oscillator

Marić, Nikica
2002.

Simulation of large-signal behavior of a GaAs low noise amplifier

Barić, Adrijan ; Butković, Željko
2000.

Reverse Engineering of a Gallium Arsenide Integrated Circuit

Matijević, Miroslav ; Koričić, Marko ; Jovanović, Vladimir ; Barić, Adrijan
1999.

Energy Balance Simulation of Submicromter Si n-MOSFETs

Butković, Željko ; Barić, Adrijan
1998.

A simple One-Dimensional Model for the Explanation and Analysis of GaAs MESFET Behavior

Barić, Adrijan ; McNally, Patrick
1998.
IEEE transactions on education

Influence of Hot Carriers on the Output Characteristics of Submicrometer MOSFETs

Barić, Adrijan ; Butković, Željko
1997.

Synchrotron X-Ray Topographic Analysis of the Impact of Processing Steps on the Fabrication of AlGaAs/InGaAs p-HEMT's

McNally, Patrick J. ; Tuomi, T. ; Herbert, P.A.F. ; Barić, Adrijan ; Ayras, A. ; Karilahti, M. ; Lipsanen, H. ; Tromby, M.
1996.
IEEE transactions on electron devices

GaAs electron mobility models

Barić, Adrijan ; McNally, Patrick J.
1995.

Piezoelectrically active defects and their impact on the performance of GaAs MESFETs

McNally, Patrick J. ; McCaffrey, J. ; Barić, Adrijan
1995.
Journal of materials processing technology

Modelling the effects of piezoelectrically active defects and their impact on the threshold voltage of GaAs metal-semiconductor field effect transistors

Barić, Adrijan ; McNally, Patrick J. ; McCaffrey, J.K.
1994.
Materials science & engineering. B, Solid-state materials for advanced technology

Biography

Adrijan Barić attended the Classical Secondary School in Zagreb and graduated in 1977. He obtained the Diploma Engineering degree (Dipl. Ing) from the University of Zagreb, Faculty of Electrical Engineering and Computing (FER) in 1982 and he obtained the MSc degree 1985 from the same Faculty. He was awarded the PhD degree from the Dublin City University, Ireland, in 1995. He was on a two-month research visit at the Rutherford Appleton Laboratory, England, during 1993, and on a six-month postdoc research visit at the Ghent University, Belgium, during 2000.

 

He is employed by the University of Zagreb, Faculty of Electrical Engineering and Computing since 1984. He is a full professor since 2008 and since 2013 he is a full professor with permanent position (tenure). He was a principal investigator of two projects funded by the Ministry of Science, Education and Sports of Croatia: ‘Modelling of semiconductor devices and high-speed electronic circuits’ (2002 to 2006) and ‘Signal integrity of mixed-signal integrated circuits’ (2007 to 2010). He was a coordinator of a project funded by the company Compaq, Shrewsbury, USA and Systemcom, Zagreb. From 2003 to 2007 he coordinated the FER research team in the FP6 project „ROBUst mixed signal design methodologies for Smart Power ICs (ROBUSPIC)“. From 2007 to 2009 he coordinated the FER research team in the EUREKA MEDEA+ project Parachute funded by the company AMI Semiconductor (Belgium) in the research area of 'Automotive IC Design for low EMC'. He coordinated the FER research team in the project GoldenGates from 2009 to 2012 funded by the company ON Semiconductor (Belgium) in the research area 'Improvement of Electromagnetic Reliability System Performance by applying Electromagnetic Synergy'. He coordinated the FER research team in the project INVENT (2011 to 2014) funded by the Flanders science foundation IWT and the company ON Semiconductor (Belgium) in the research field 'Integrated Voltage Regulator using Novel Topologies and Devices'. He coordinated the FER research team in the FP7 project 'IMOLA - Intelligent light management for OLED on foil applications' (1 October 2011 to 31 March 2015) (partners on the project IMOLA were: imec (Belgium), TNO (The Netherlands), Philips (Germany), NXP (The Netherlands), NXP (Belgium), Hanita (Israel), Henkel (Belgium), CRP (Italy)). He coordinated the FER research team in the BICRO POC5 project ‘Electro-optical detector for on-chip measurements of broadband current pulses’ (‘Croatian: Elektro-optički detektor za mjerenje širokopojasnih strujnih izboja na čipovima’) (1 Jan 2014 to 31 May 2015) and the FER research team in the project “Wirelessly powered microelectronic circuits for distributed sensor networks” funded by European Structural Funds via the Ministry of Science Education and Sports of Croatia (21 Oct 2014 to 20 Feb 2016).

 

He presently coordinates the project IVPROBE funded by the company ON Semiconductor (Belgium) in the field of high-bandwidth, high current, high voltage on-chip probing (2015 to 2018), the project “Electromagnetic Compatibility Simulation Environment” on behavioural modelling of analogue electronic circuits in the time domain funded by the company ams AG (Unterpremstaetten, Austria) (1 Sep 2014 to 31 Aug 2017), the project “Advanced design methodology for switching DC-DC converters” funded by the Croatian Science Foundation HRZZ (1 Jun 2015 to 31 May 2019) and the project “Next Generation Highly Integrated RF Gate Drive Circuit for High Switching Speed Semiconductors” funded by the company UTRC Ireland (United Technologies Research Center Ireland) (2016 to 2017).

 

The research group he lead has designed and sent for processing 9 chips in the CMOS technologies ranging from 130 nm to 350 nm through EUROPRACTICE or MOSIS.

 

He was the President of the Committee for Research, Development and Technology of the University of Zagreb from 2007 to 2011. From 2006 he has been a member of the Council of Technical Faculties of the University of Zagreb and from 2013 he has been the President of the Council of Technical Faculties of the University of Zagreb.

 

At the Faculty of Electrical Engineering and Computing he was a member and the president of the Committee for Recognition of Academic Degrees (from 1998 to 2006) as well as the president of the Committee for Disciplinary Actions (from 2005 to 2006). He was the vice dean for research at FER from 2006 to 2008. He is a member of the Committee for Research and International Cooperation from 2010 to 2016 and since 2016 a member of the Committee for Research and Innovation. He was a member of the Presidency of AMAC-FER from 2006 till 2015. Since 2015 he is a member of the Supervisory Board of AMAC-FER. He is the Chair of the Department of Electronics, Microelectronics, Computer and Intelligent Systems since 2016. He is the President of the Research and Development Committee of the Innovation Center “Nikola Tesla” since 2016.

 

He was a General Chair of the IEEE International Conference on Electronics, Circuits and Systems - ICECS 2002, Co-Chair of the IEEE Mediterranean Electrotechnical Conference - MELECON 2004, Finance Chair of the IEEE International Symposium on Industrial Electronics - ISIE 2005, amd Technical Programme Chair of the conference Electromagnetic Compatibility of Integrated Circuits 2011 - EMC Compo 2011. He was a member of the Steering Committee series of the series of conferences IEEE ICECS. He is a member of the Programme Committee of a series of conferences ECCTD and a series of conferences EMC Compo. He is a member of the Programme Committee of the conference IEEE EMC Europe 2017.

 

He is a member of the societies IEEE, HD MIPRO, KoREMA and AMAC-FER.

 

He is the recipient of the Golden Plaque “Josip Lončar” for 2015, which is awarded by the Faculty of Electrical Engineering and Computing, University of Zagreb.

 

The list of published papers can be found on the link:

http://bib.irb.hr/lista-radova?autor=136444 .

Teaching

University undergraduate

University graduate

Postgraduate doctoral study programme

Competences

  • Components, packaging, and manufacturing technology
    Integrated circuit packaging
  • Electromagnetic compatibility and interference
    Electromagnetic compatibility Immunity testing Electromagnetic coupling Radiofrequency interference
  • Circuits and systems
    Analog integrated circuits Circuit simulation Analog-digital integrated circuits Integrated circuit modeling Mixed analog digital integrated circuits Radiofrequency integrated circuits Microwave circuits Power integrated circuits
  • Communications technology
    High-speed integrated circuits
  • Solid state circuits
    MOS integrated circuits

Professional memberships

  • Physics and modelling of semiconductor devices
  • On-chip measurements of passive and active components
  • Analysis and design of mixed signal integrated circuits
  • Analysis and design of switching voltage converters
  • Interconnect analysis on-chip and on printed circuit boards
  • Electromagnetic compatibility (EMC)

Personal data

Personal web page:
Graduation year:
1982.
mr.sc. graduation year:
1985.
PhD graduation year:
1995.
Employed in this institution since:
1984.

List of select projects

  • Fast switching converters based on GaN devices and resonant architectures (IP-2019-04-8959), Croatian Science Foundation (Croatia), 2020 - 2024
  • ESD modelling (MUNJA), main partner ON Semiconductor BVBA, Belgium, 2018-2022
  • Broadband probe and stress test chip, main partner ON Semiconductor BVBA, Belgium, 2015-2018
  • Advanced design methodology for switching DC-DC converters (IP-2014-09-6405), Croatian Science Foundation (Croatia), 2015 - 2019
  • On-chip EMC sensor, main partner ams AG, Austria, 2017-2018
  • Electromagnetic Compatibility Simulation Environment,  main partner ams AG, Austria, 2014-2017
  • Next Generation Highly Integrated RF Gate Drive Circuit for High Switching Speed Semiconductors, main partner UTRC, Cork, Ireland, 2016-2017
  • Wirelessly powered microelectronic circuit for distributed sensor networks, European Union through the European Regional Development Fund via Ministry of Science Education and Sports (Croatia), 2014 - 2016
  • Electro-optical detector for on-chip measurements of broadband current discharges, BICRO PoC (Croatia), 2014 - 2015
  • Intelligent light Management for OLED on foil Applications (IMOLA), FP7, 2011 - 2015
  • Integrated voltage regulator using novel topologies and devices, main partner ON Semiconductor BVBA, Belgium, 2011-2015
  • Improvement of Electromagnetic Reliability System Performance by applying Electromagnetic Synergy, main partner ON Semiconductor BVBA, Belgium, 2009-2012
  • Automotive IC design for large EMC, main partner ON Semiconductor BVBA, Belgium, 2007-2009
  • ROBUst mixed signal design methodologies for Smart Power ICs (ROBUSPIC), FP6, 2003 - 2007
  • Nelinearno modeliranje poluvodičkih elemenata (MZOŠ)
  • Modeliranje elemenata i projektiranje brzih sklopova (MZOŠ)
  • Kvaliteta signala u integriranim sklopovima s mješovitim signalom (MZOŠ, 2007-2009)

Past employments

2008 – now Full professor (since 2013 full professor tenure), University of Zagrebu, Faculty of Electrical Engineering and Computing

2002 – 2008 Associate Professor, University of Zagrebu, Faculty of Electrical Engineering and Computing

1996 – 2002 Assistant Professor, University of Zagrebu, Faculty of Electrical Engineering and Computing